Industrial Valve Price List India 2026
Key Takeaways for 2026 Procurement
- Baseline Pricing: 1″ SS304 flanged ball valves start at ₹1,450 per piece.
- Material Premium: SS316 valves carry a consistent 40–45% premium over SS304.
- Large Diameter Savings: Butterfly valves offer up to 70% cost savings over ball valves for sizes 6″ and above.
- Bulk Discounts: Project orders of 50+ pieces typically qualify for 10–20% tiered discounts.
- Tax Note: All listed rates are exclusive of 18% GST (HSN 8481).
Quick Reference Rate Chart
2026 Industrial Valve Price List Overview
This comprehensive industrial valve price list covers the four most widely used valve types in Indian process piping. Rates are compiled from verified Indian suppliers and reflect mid-2026 market averages across SS304, SS316, and carbon steel material grades. All prices are for standard pressure class (Class 150), flanged-end connections unless otherwise noted.
Ball Valve Prices in India
Ball valves account for an estimated 45–50% of total valve unit volume in India. The prices below cover full-bore floating ball designs in SS304 and SS316 with flanged ends (ASME B16.5 Class 150) and PTFE/FKM soft seats.
| Size (DN) | SS304 Flanged | SS316 Flanged | CS Forged Flanged |
|---|---|---|---|
| 1/2″ (DN15) | ₹850 | ₹1,200 | ₹480 |
| 1″ (DN25) | ₹1,450 | ₹2,050 | ₹820 |
| 2″ (DN50) | ₹3,500 | ₹4,900 | ₹2,000 |
| 4″ (DN100) | ₹12,000 | ₹16,800 | ₹6,500 |
| 6″ (DN150) | ₹22,000 | ₹30,800 | ₹11,500 |
Gate Valve Prices in India
Gate valves are dominant in water supply, fire protection, and oil and gas transmission. Prices below cover OS&Y (outside screw and yoke) rising stem designs with flanged ends conforming to ASME B16.5 Class 150.
| Size (DN) | CS WCB + SS410 Trim | SS304 Body + Trim | SS316 Body + Trim |
|---|---|---|---|
| 1/2″ (DN15) | ₹380 | ₹780 | ₹1,100 |
| 1″ (DN25) | ₹650 | ₹1,350 | ₹1,900 |
| 2″ (DN50) | ₹1,800 | ₹3,600 | ₹5,100 |
| 4″ (DN100) | ₹5,800 | ₹11,500 | ₹16,200 |
| 6″ (DN150) | ₹10,500 | ₹18,000 | ₹25,500 |
Check Valve Prices in India
Check valves (non-return valves) prevent damaging reverse flow. Prices below cover swing check valves and dual plate (wafer) check valves for flanged-end, Class 150 pressure ratings.
| Size (DN) | Swing Check SS304 | Swing Check CS | Dual Plate SS304 |
|---|---|---|---|
| 1″ (DN25) | ₹1,100 | ₹650 | ₹1,400 |
| 2″ (DN50) | ₹2,800 | ₹1,650 | ₹3,200 |
| 4″ (DN100) | ₹8,500 | ₹5,200 | ₹9,800 |
| 6″ (DN150) | ₹15,000 | ₹9,200 | ₹17,000 |
Butterfly Valve Prices in India
Butterfly valves provide the most economical solution for flow control in pipe sizes 2 inch and above. Prices cover wafer-type and lug-type configurations.
| Size (DN) | Wafer SS304 | Wafer Ductile Iron | Lug SS304 |
|---|---|---|---|
| 2″ (DN50) | ₹1,800 | ₹950 | ₹2,500 |
| 4″ (DN100) | ₹4,200 | ₹2,200 | ₹5,800 |
| 6″ (DN150) | ₹6,500 | ₹3,400 | ₹9,000 |
| 8″ (DN200) | ₹10,000 | ₹5,200 | ₹14,000 |
Material Cost Comparison
Material selection is the single largest cost variable in industrial valve procurement. Carbon steel (ASTM A216 WCB) offers the lowest acquisition cost, while SS304 (ASTM A351 CF8) provides excellent general corrosion resistance. SS316 (ASTM A351 CF8M) adds molybdenum for superior pitting resistance in chloride-rich environments.
Impact of End Connections on Pricing
The end connection type significantly influences the final valve cost. Flanged valves require additional machining operations (facing, drilling), making threaded-end (NPT/BSP) valves 25–40% cheaper for the same size and material. However, threaded connections are generally limited to sizes 2 inch and below.
| End Connection | Cost vs Flanged | Size Limitation |
|---|---|---|
| Flanged (ASME B16.5) | Baseline (100%) | 1/2″ and above |
| Threaded (NPT/BSP) | −25% to −40% | Up to 2″ (DN50) |
| Wafer (between flanges) | −30% to −50% | 2″ and above |
| Butt Weld | −5% to −15% | 1″ and above |
Bulk Discount Tiers for Project Orders
Indian valve suppliers operate on volume-based pricing that rewards larger order quantities with progressively lower per-unit rates. Understanding these discount tiers is essential for accurate EPC budgeting.
How to Maximize Valve Procurement Savings
Consolidate your valve requirements across multiple piping systems into a single purchase order to qualify for higher discount tiers. Timing your procurement to align with quarter-end (March, June, September, December) can also yield an extra 3–5% discount on competitive rates.
| Order Volume | Typical Discount | Example: 2″ SS304 Ball Valve |
|---|---|---|
| 1 – 10 pcs | List price | ₹3,500 |
| 10 – 50 pcs | 5% – 10% off | ₹3,150 – ₹3,325 |
| 50 – 500 pcs | 10% – 20% off | ₹2,800 – ₹3,150 |
| 500+ pcs | 15% – 30% off | ₹2,450 – ₹2,975 |
Request a Firm Quotation for Your Project
Send us your valve requirement list (type, size, material, quantity, end connection) and receive a competitive quote within 24 hours.
📧 Email: sales@kelorvalves.com 📞 WhatsApp InquiryFrequently Asked Questions
Important Disclaimer
All prices published in this guide are market estimates compiled from multiple Indian industrial valve suppliers as of mid-2026 and are intended for budgetary planning purposes only. Actual quoted prices will vary based on specific supplier, order quantity, pressure class, and current raw material market conditions. Prices are exclusive of 18% GST and freight.